When you’re trying to clean shower tiles and bathroom tiles without scrubbing, it can be a long and tedious process. But don’t worry – there’s an easier way. With a few simple ingredients found in most households, you can get your shower tiles sparkling without any hard scrubbing.

Let’s take a look at how it’s done.
The Magic of Baking Soda and Vinegar
Baking soda and vinegar are two of the most versatile cleaners out there. When mixed together, they create a powerful cleaning solution that can tackle some of the toughest dirt and grime on your shower tiles.
If you’re looking for an environmentally friendly way to clean your shower tiles without scrubbing, baking soda is a great option.
Here’s how it’s done:

Step 1 – Start by sprinkling baking soda onto the tiles in your shower. Make sure all surfaces are covered but avoid getting too much into crevices or corners, as this can cause more harm than good if left unattended.
Step 2 – Next, grab a spray bottle with some diluted vinegar in it (use equal parts vinegar and water). Spray the vinegar onto the baking soda-covered tiles until they are damp but not wet. The mixture will begin fizzing – this is normal. Allow it to sit for 10-15 minutes before rinsing off with warm water.
Step 3 – Gently wipe your tile surfaces with a soft cloth or sponge, and you’ll see an immediate difference – less dirt and grime buildup, and more shine.
If you want to make this cleaning routine even simpler, try investing in a squeegee or shower-door cleaner that can help eliminate soap scum and hard water buildup.
If the stains on your shower tiles are still visible after you try this method, then it may be time to move on to something stronger, like bleach or hydrogen peroxide. Just remember that both of these products are extremely powerful so use them with caution.
Achieve a Spotless Shower with Steam Cleaning
Steam cleaning is an effective way of loosening dirt, grime, and soap scum from your shower tiles without scrubbing.

Here’s how it works:
Step 1 – Purchase a steam cleaner or rent one from your local hardware store.
Step 2 – Prepare your shower tiles by wiping them down with a wet rag or mop to remove any debris.
Step 3 – Fill the steam cleaner with water and a small amount of soap or cleaning solution. Hold the machine several inches away from your tiles and start the steam cleaning process.
Step 4 – Once your tiles are clean, you can use a squeegee or microfiber cloth to remove any excess moisture.
A steam cleaner uses pressurized hot water vapor that penetrates deep into the grout and tile surfaces to break apart dirt particles and dissolve tough stains.
This method is also highly efficient when it comes to killing germs and bacteria in hard-to-reach areas, making it ideal for areas prone to mold growth.
How do professionals clean tile in showers?
Professional cleaners use a few basic tricks and tools to keep their tile showers looking sparkling. While it might be tempting to get elbow-deep with your scrub brush, professionals prefer the use of high-tech cleaning agents that can quickly and effectively remove dirt and grime while maximizing their time.

Below is a step-by-step guide on how to clean tiles in your shower like professionals.
Step 1
To clean soap scum more effectively, first use a dry scrubber before using any cleaning products. This will remove any loose dirt and grime, making it easier for the cleaning products to work their way into the pores of your tiles.
Step 2
Soak the shower surface with an all-purpose cleaner for five minutes. This will help break down the grime and dirt, making it easier to remove.
Step 3
Use a plastic all-purpose scouring pad to scrub away stuck-on grime and other stains. These pads are gentler than metal scrubbers, which can damage your shower surface over time.
Step 4
Rinse away any leftover soap with hot water, then wipe down the shower with a squeegee. This will help remove any excess cleaner and dry your tiles, leaving them looking clean and shiny.
Step 5
After you finish cleaning, dry off the door and tiles to prevent mold, soap scum, and water stains from forming. You can dry the door by using a microfiber towel or a squeegee.
While cleaning the tile in your shower can be a bit of a chore, with the right tools and techniques you can keep your shower looking sparkling clean for years to come.
Final Thoughts
Regular maintenance is key when it comes to keeping your shower squeaky clean. To ensure long-lasting results, consider investing in a squeegee or microfiber towel that you can use after each shower session to quickly remove moisture from the walls of your tub or stall before it has time to settle in between tiles or grow mildew.
Also, remember to wipe down the tile surface once every few weeks will help prevent the buildup of dirt and grime that would otherwise require more intensive cleaning methods.
With these simple tips and tricks, you can achieve a spotless shower without any hard scrubbing. Whether you use baking soda and vinegar, steam cleaning, or professional tile cleaning services, the end result will always be the same – a clean, sparkling shower that looks and smells great.